USED CNC EQUIPMENT AND MACHINERY FOR SALE:

• 1993 VF-3 Vertical Machining Center, 20 Tool Umbrella Type Tool Changer, 4th Axis Capable, With Full Bed Alum Sub plate. 500 Ipm Rapids, Programmable Coolant, 10,000 Rpm, 15 HP, 2 Speed Gearbox, Rigid Tapping, Chip Auger, Brush Type Servos.
• 2002 VF-3 Vertical Machining Center, 25 Tool Side Mount Tool Changer. 4th Axis Capable, With Full Bed Alum Sub plate. 800 Ipm Rapids, Programmable Coolant, 10,000 Rpm, 20 HP, 2 Speed Gearbox, Rigid Tapping, High Speed Machining Look-A-Head, Chip Auger, Brush less Servos. 1 Mb Extended Memory.
• 2002 VF-3 Vertical Machining Center, 25 Tool Side Mount Tool Changer. 5th Axis Capable, With Full Bed Alum Sub plate. 1000 Ipm Rapids, High Pressure Through Tool Coolant, Low Pressure Programmable Coolant, 10,000 Rpm, 20 Hp, 2 Speed Gear Box, Rigid Tapping, High Speed Machining Look-A-Head, Chip Auger, Brush less Servo’s, High Intensity Lighting,  1 Mb Extended Memory.
• 1997 HL-4 Turning Center 34” Turning Length, 14” Diameter. 30 Hp, 2 Speed Gearbox, Programmable Tailstock, Parts Catcher, 12 Station Tool Turret, Bar Feeder Interface, Chip Auger, 10” Kitagawa Hydraulic. Chuck, 2 ½” Thru Bore, Brush less Servo’s, 1 Mb Extended     Memory, Tool Presetter. Large Assortment Of Bolt On Soft Jaws, I Set Hard Jaws. All Electronic Boards, Vector Drive, And Software Were Replaced In 2004.
• 2002 SL-20T Turning Center. 10 Station Tool Turret, 20 Hp Dual Vector Drive, Programmable Tail Stock, Bar Feeder Interface, 8” Kitagawa Hydraulic Chuck, 1 ¾” Thru Bore Brush Less Servo’s, High Intensity Lighting, Tool Setter, Chip Conveyor. Large Assortment Of Steel Soft Jaws, Alum Soft Jaws, 2- Sets Hard Jaws.
• HRT-160 Brush Type 4th Axis, 1 ½” Thru Bore C/W 6” 3 Jaw Chuck, Tail Stock
• HRT-210 Brush less 4th Axis 3” Thru Bore C/W 10” 3 Jaw Chuck, Tail Stock
• CNC Milling Tool Holders
• CNC Lathe Tool Holders
• Tooling Cabinet, Lathe Inserts, Milling Inserts, Depth, Bore, OD Measuring Tools, Height Gage On Surfaced Plate, Insert Drills, Reamers, Collets, Lathe And Mill Tools, Arbors, Parrells, Set Up Angle Tools, Broaches, Manual Rotary Indexer, 2 - 6” Machining Vises, Digital Calipers, Vernier Calipers To 24” Etc.
• 1996 Comp-Air Screw Type Shop Air Compressor. 90 Cfm 20 Hp, Inter-Cooled, 500 Gal Storage Tank
• 1992 Proth Surface Grinder, 10”W X 20” Grinding Area, Magnetic Chuck, Auto Feed, Coolant, Hyd Power Unit, Wheel Balancer. Very Low Hours.
• 1992 Chin Hung Cylindrical Grinder, 14” Dia X 40” Grinding Length, Internal Grinding Attachments, Coolant And Hydraulic Power Unit, Wheel Balancer And Extra Stones. Extremely Low Hours. 
• 1991 Nardini Manual Lathe, 10” Over Cross Slide, 40” Between Centers, 22” Dia In Gap, 10” Chuck, Tailstock. Follow And Steady Rests, Coolant System, 2 1/16” Thru Bore, 7 Hp Motor.
• 1992 First Advance Vertical And Horizontal Milling Machine, Geared Power Feeds In X, Y, And Z-Axis. 48” X 10” Table, 5 Hp, Powered Z Feed, Coolant System, Arbors And Rests For Horizontal Work, With Vise And Some Tooling. Very Low Hours.
• 1992 Hyd-Mech S-20a Hydraulic Band Saw. Coolant System, Auto Feed 16” Wide X 14” Cut Height.
• 2002 Huth Pipe Bender, With Expanding And Contracting Attachment, Bar Bending Attachment, 3” Pipe Capacity, Low Hours Like New Condition.
• Motorized Tubing Roller 3” X 4” Capacity.
• 1998 ESAB Migmaster Mig Welder, 250 Amt At 50% Duty Cycle.
• 2001 Acklands 300 Amp Tig, Stick, Carbon Arcing.
• Oxy – Acetylene Cutting Torch On Large Wheeled Cart.
• 2001 Thermal Dynamics Plasma Cutter 3/8” Capacity.
• 1990 50 Ton Hydraulic Shop Press.
• Tool Chests With Roll Away, Hand Tools, Grinders, Sanders Air Drills, Chop Saw, Vertical Band Saw, Delta Table Saw, Bench Grinders, Specialty Lathe And Vise Jaws, Planer, Table Saws, Heaters, Belt Sanders, Dust Collection System.
• Rammond Electric Forklift, 4000 Lbs, Extending Fork, 36 Volt, Charger.
• 1996 Burr King Vibra Burr Model 33 Tumbler 36” X 14” X 12” 200lb Capacity, With Water Flush System.
• Machining Benches, Vises, Cabinet Bench C/W 6” Record Vise, Arbor Press.
• 29' x 12' OD, (20’ x 10’ ID) Devilbis Paint Booth With Air And Dust Evacuation System And Overhead Lighting.
• 1994 Modublast Glass Beading Cabinet C/W Air And Dust Evacuation System.
• Electrical Equipment And Testing Equipment. Tektronics Tds1012 Waveform Scope, 2- Fluke Multi-Meters, 2005 Labveiw Data Collection System With Dedicated Computer, Battery Load Testing Machine, Industrial Battery Charger, Xantrex Power Inverter 1000w 8 Amps, Large Assortment Of Wiring, Delphi Packard Plugs, Wiring Connectors, Military Amphanol Plugs.
• Large Assortment Of Perishables, Coolant, Mill And Lathe Oils, Lubricants And Grease, Acids.
• Anodizing System. Distilled Water Tanks, Anodizing Tank, Stainless Steel Dye Tank, Stainless Steel Sealant Tank On Wheeled Carts.
• Norstar Telephone System.
• Storage Shed, Compressor.

DISCLAIMER:  We are not real estate agents.  Listings on www.pin.ca are private offerings and the sale of any investment unit listed on this website has not been qualified, endorsed or recommended by any Federal, Provincial or Securities agency or commission. Do your own due diligence with the help of licensed, professional lawyers, accountants and investment counsellors. Do not rely upon this, or related websites, for investment advice. We try to provide quality information, but we make no claims, promises or guarantees about the accuracy, completeness, or adequacy.

PIN has been operating since 1998 and is ready for major expansion.
Agents wanted worldwide -- click for details.
(Saskatchewan and Manitoba are already covered)